Press Release (ePRNews.com) - BIELEFELD, Germany - Feb 07, 2017 - Ceramic Polymer GmbH constantly works on coating solutions for the ideal corrosion protection in different industries. The product CERAMIC-POLYMER KTW-1 was especially developed for the sensitive scope of drinking water installations. Recently, the coating was tested by the „Ruhr District Institute of Hygiene” in Gelsenkirchen/Germany in accordance with the German standard DVGW-W270 and for warm water applications (60 °C / 140 °F) subject to the coating guidelines of the Federal Environment Department (Germany).
To prove the unlimited harmlessness of CERAMIC-POLYMER KTW-1 the Ceramic Polymer have carried out extensive test series.
Warm water (60 °C / 140 °F) The inspection for warm water suitability in accordance with the coating guidelines of the Federal Environment Department lasted 2 months. The purity of the coating is reflected in the results of the institute – the test values of the migration test are far below the requested limits!
DVGW-W270 The test concerning the growth of microorganisms on materials for use with drinking water in accordance with the code DVGW-Technical Regulations, Code of Practice W270 (11/2007) took 3 months. The test specimens were examined on slime formation and the growth of microorganisms after a defined schedule. The „biofilm formation” on the coated surfaces remained at all measurements clearly below the limited values.
Therefore, CERAMIC-POLYMER KTW-1 is also qualified in microbiological aspects for drinking water applications up to 60 °C (140 °F).
Advantages of CERAMIC-POLYMER KTW-1 • solvent-free, special organo-ceramic® fillers • tested for warm water (60 °C / 140 °F) and DVGW-W270 guidelines • simple application by airless spraying method • 1-layer application
The specific organo-ceramic® fillers in CERAMIC-POLYMER KTW-1 are naturally occurring raw materials. They are absolutely metal-free and not synthetically produced or chemically treated. Prior to their use, the particles are purified at a temperature of 1.400°C (2,550 °F). Thereby, Ceramic Polymer obtain an extremely clean mineral filler.
In composition with a harmless, high functional epoxy resin base, Ceramic Polymer provide an innovative and entirely nonhazardous coating product for effective corrosion protection of drinking water installations.
CERAMIC-POLYMER KTW-1 is designed • for the coating of new tanks • for the repair of tanks • for equipment and seals of pipelines
DISCLAIMER : If you have any concerns regarding this press release, please contact the Author / Media Contact / Business of this press release. ePRNews is not resposible for the accuracy of the news posted and do not endorse, support any product/services/business mentioned and hereby disclaims any content contained in this press release.