Navigating Medical Device Labeling Requirements

Navigating Medical Device Labeling Requirements

Press Release (ePRNews.com) - HELSINKI, Finland - Jan 12, 2016 - The Basics of Product Marking

Standards state that all identifications and markings shall be permanently affixed. Nowadays, this means that markings are either imprinted into a plastic cover, or printed onto sticker type labels. Typically, the required information is collected on a device label located near the mains input connection or at the back or bottom of the device.

The second requirement for markings is that they shall be clearly legible, meaning that the size and contrast of text and symbols shall be good enough for a person with normal vision to read. The special requirement for warning texts is that they need to be legible from the operator’s position.

Sometimes the size of equipment makes it difficult to include all markings on the device. In those instances, there are minimum sets of markings with the rest being included in the accompanying documents.

Basic Standard IEC 60601-1, Second Edition

In the second edition of the basic standard, the minimum requirements for information to be found on the labeling are:

1. Indication of origin (manufacturer)
2. Model or type reference
3. Connection to electrical supply (if not permanently connected)
4. Classification (electrical isolation, IP, patient connection)
5. Warning of possible physiological effects (radiation, etc.).

There are additional requirements for information and markings, but these do not need to be printed on the device. They can, for example, cover special requirements for storing and unpacking the device.

Basic Standard IEC 60601-1, Third Edition

In the third edition the minimum requirements for labeling are:

1. Manufacturer’s name or trademark
2. Model – can be left out, if it cannot cause a hazard
3. Type of electrical feed – model or type of source, if fed from another device, mains feed voltage, number of phases of type of current, frequency, possible symbol for class II device
4. Patient connection type
5. Warning of possible physiological effects
6. Contact information for manufacturer (addition in Amendment 1)
7. Serial number or lot/batch identification (Amdt 1)
8. Possible best before date for products with limited shelf life (Amdt1)

Unique Device Identification and Future Requirements

Collateral standards bring new requirements for labeling. For example, EMC standard IEC 60601-1-2 states that devices intended only for a shielded environment shall carry a warning for that purpose. The same standard also requires that if the device transmits a radiofrequency signal, it must be equipped with an antenna symbol. Equipment used in home environments has requirements for IP classification and the device has to be labeled accordingly. Device specific standards generate more requirements for labeling and required information.

In the future, all medical devices need to be identifiable through a Unique Device Identification (UDI). This is part of the FDA’s current requirements and part of the forthcoming European Medical Device Regulation. The idea is to have device information in an easily machine-readable format, a bar code that connects the specific unit to a common UDI database.

It should be noted that, for example, European directives and FDA/FCC requirements might bring additional requirements for labeling.

Safety Symbol Variation

In the second edition, the black and white symbol of a triangle with an exclamation mark has been used to mean, “Attention, consult accompanying documents”. In the third edition this symbol was replaced by a symbol of a book with the letter “i” for information. In addition to this, the third edition requires manufacturers to use colored warning symbols for hazards associated with not paying attention to the warning symbols. Use of colors is compulsory.

What is the difference between the black and white i-book symbol and the blue and white man-reading-book symbol? The black and white symbol is used when it is advisable to read the accompanying documents. The blue and white symbol tells the user that according to the manufacturer’s risk analysis, not reading the instructions can cause a hazard.

Limitations on Electronic Format Instructions

Many manufacturers want to deliver all manuals and instructions for use in electronic format. This is not possible in all cases. The European Commission’s Regulation 207/2012 on electronic instructions for medical devices allows the use of electronic instructions for specific device classes that are intended only for professional users. There are additional limitations. For example, risk analysis must support the equal or better safety of electronic instructions in comparison to paper documents.

Additional Information

– Global Harmonization Task Force SG1/N70: 2011 Label and Instructions for Use for Medical Devices
– European Commission’s Regulation 207/2012 (PDF 725 KB) (http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:…)
– FDA’s General Device Labeling Requirements (http://www.fda.gov/MedicalDevices/DeviceRegulationandGuid…)

For further information, please contact:

Contact details:

SGS Consumer and Retail
Seppo Vahasalo
Product Line Manager
SGS Fimko Oy
Särkiniementie 3
Helsinki, Finland

Website: http://www.sgs.com/pages/consumer-testing/sgs-consumer-goods-and-retail.aspx
LinkedIn: www.linkedin.com/company/sgs-life-sciences

SGS is the world’s leading inspection, verification, testing and certification company. SGS is recognized as the global benchmark for quality and integrity. With more than 80,000 employees, SGS operates a network of over 1,650 offices and laboratories around the world.

Source : SGS Consumer Testing Services
SHARE :  

CATEGORIES : Medical

Login

Or using ePRNews Account

Don't have an account ? Sign Up

Register New Account

Already have an account ? Login

Reset Password

Already have an account ? Login

DISCLAIMER

If you have any concerns regarding this press release, please contact the Author / Media Contact / Business of this press release. ePRNews is not resposible for the accuracy of the news posted and do not endorse, support any product/ services/ business mentioned and hereby disclaims any content contained in this press release.